PORSCHE 944 CARRERA WING
Can't find what you need? Try browsing the Accessories or Exploded Diagrams!<-- Try narrowing by car using the menu to the left.
Fabspeed's 996 Carrera performance package replaces the restrictive OEM mufflers and factory cats with high-performance mufflers and 200-cell hjs sportcats for a deeper, throatier exhaust note and improved power and throttle response. the included performance headers replace the restrictive factory headers and with high-flowing motorsport headers. lastly, the restrictive factory airbox is replaced by fabspeed's carbon fiber competition intake system which increases the cold air flow into the engine for better power and sound.
Includes:
Maxflo performance mufflers
General Fitment 911 1998-05
$8,839.13
Make a selection
Product details:
Replaces blower motor assembly and ductwork while allowing plenty of heat; replicated from factory rs part
Features:
-fits all 964 Carrera vehicles (1989-1994)
-saves 8 lbs from rear of vehicle
-replica of the Porsche rs lightweight factory heat duct
-factory Porsche part is roto-formed plastic with parting lines where as the fabspeed rs heater pipe is genuine carbon fiber.
-replaces blower motor assembly/ductwork and still allows heat in the cabin.
-improves aesthetic value with clear coated carbon fiber tube.
-easy 20 minute diy install
-all fabspeed performance products are backed by the fabspeed lifetime limited warra...(choose a part on the right to read more)
General Fitment 911 1989-94
Product details:
Complete high-performance exhaust & intake solution for the 996 Carrera; includes maxflo performance exhaust, sportcat x-pipe, performance headers, competition intake, evomsit ecu tune & deluxe quad-style tips.
Fabspeed’s 996 Carrera performance package replaces the restrictive OEM mufflers and factory cats with high-performance mufflers and 200-cell hjs sportcats for a deeper, throatier exhaust note and improved power and throttle response. the included performance headers replace the restrictive factory headers and with high-flowing motor sport headers. lastly, the restrictive factory airbox is replaced by fabspeed’s carbon fiber competition intake sys...(choose a part on the right to read more)
General Fitment 911 1998-05
$7,795.00
Make a selection
Product details:
Loud and aggressive performance exhaust system recommended for track use only; replaces the restrictive factory mufflers with a free-flowing resonated design.
Features:
-fits all Porsche 997 Carrera vehicles from 2005-2008
-saves 12 lbs from the rear of the vehicle
-upgrade to fabspeed deluxe quad-style tips available in polished or black chrome finish
-direct replacement for the factory mufflers; compatible with the factory OEM cats or fabspeed’s sportcat or cat bypass x-pipe
-dramatically reduces back pressure and improves exhaust flow and sports car sound
-complete t304l stainless steel construction; 14-16 gauge cnc mandrel-bent 2.25...(choose a part on the right to read more)
General Fitment 911 2005-08
From $1,995.00
Make a selection
Product details:
Complete high-performance exhaust & intake solution for the 997 Carrera; includes maxflo performance exhaust, sportcat x-pipe, performance headers, competition intake, evomsit ecu tune & deluxe quad-style tips. Fabspeed’s 997 Carrera performance package replaces the restrictive OEM mufflers and factory cats with high-performance mufflers and 200-cell hjs sportcats for a deeper, throatier exhaust note and improved power and throttle response. the included performance headers replace the restrictive factory headers and with high-flowing motor sport headers. lastly, the restrictive factory airbox is replaced by fabspeed's carbon fiber competition intake system which increases the cold air ...(choose a part on the right to read more)
General Fitment 911 2005-08
$7,795.00
Make a selection
Quicker acceleration.
Kit contains the following part:
Pressure plate, rigid organic disc, release bearing, grease.
Fits: Carrera 4s, 3.8l, 283kw (09-), Carrera 4, 3.6l, 254kw (09-), Carrera s, Carrera
General Fitment 911 2009-12
$1,321.44
Make a selection
Hailing from the baden wurttemberg region in Germany, speaking the language and dealing with lead engineers from the OEM and motor sport manufacturers for more than 30+ years has many advantages. Our FVD exclusive line of clutch kits is culmination of Porsche genuine parts, zf sachs race engineering gmbh parts and factory motorsports parts that have been developed to work together without compromise. We not only cycle test these kits, we install them on our street cars to test them in the real world. They offer a silky smooth release, superb drivability and can handle more torque (430 ft/lbs. / 560 nm max.) compared to the kits that are "off the shelf" recommendations from OEM suppliers. These kits are perfec...(choose a part on the right to read more)
General Fitment 911 1970-73
From $1,578.04
Make a selection
Content: 5x double open-ended wrench (one each: 8x9, 10x11, 12x13, 14x15 and 17x19), 1x wheel nut wrench, 2x holding tools for v-belt, 1x combination pliers, 1x screwdriver, 1x phillips screwdriver, 1x pull-off lever for hub cap, 1x flexible head socket wrench, 1x spark plug socket wrench, 1x hexagon socket wrench, 1x spark plug ratchet wrench, 1x stubby screwdriver, 1x brush, 1x feeler gauge, 1x wheel nut, 1x narrow v-belt, 2x spark plug holder, 1x cleaning cloth  while the original was made of synthetic leather, the impressive new edition of the tool bag for the 356 Carrera is finished in extremely high-quality leather just like the design for the remaining 356 models, this version also features brown leat...(choose a part on the right to read more)
From $729.96
Make a selection
Sport rear silencer sets for - Porsche 993 Carrera 3.6l; Porsche 993 Carrera rs 3.8l; Porsche 993 cup.
. These sport rear silencers have been developed and tested to the highest standard on the dyno. They are designed as absorptive silencers which reduce exhaust back pressure drastically. The result is beside more power and torque a better response characteristic.
Further evidence of improvements made, are recognised through an enhanced accoustic and weight reduction.
Strenghtened brakets as well as the olive- and slide system ensure an exact adjustment, which guarantees a stressless installation.
New modular design with the possibility of interchanging components. Developed for maximum ...(choose a part on the right to read more)
General Fitment 911 1994-98
A modest rearspoiler for your 997 Carrera.
Extremely good quality make it easy to paint and install this piece. Cut outs for both the 997.1 and 997.2 intakes exist on this peice. There are also recessed screw locations to install the fan.
Harness 997 612 670 71 has to be ordered in conjunction with this wing to make sure there is no fault from the adjustable wing.
For 997.2 cars, the OEM intake boots on the right and left side of the decklid must be removed and attached to the FVD decklid.
Fits: Carrera 4, 3.6l, 254kw (09-), Carrera s, 3.8l, 283kw (09-), Carrera, 239kw (05-08), 261kw (05-08)
General Fitment 911 2009-12 911 2005-08
$2,342.59
Make a selection
997 GT3 rear spoiler fits all 997 (not turbo)
Includes: deck lid, aluminum upright, 3rd brake light housing and wing (l= 145cm, b=28cm, h=7 cm) with end plates. Material: aluminum, fiberglass.
Also available with wing blade in kevlar / carbon FVD 512 997 GT3 rs2
Tech tip:
Facelift models (2009- ), the 3rd brake light can usually be assumed. If necessary please order the 3rd brake light 997 631 052 01 separately.
The holes for the intake fan on the rear deck lid must be drilled prior to installation (model variations). Please note wing is fixed and is not adjustable.
The air inlet of the rear is not included. Please order 99751262591g2x
Fits: GT3 rs, 4l, 368kw (11-), 3.8l, 331kw (10-), GT...(choose a part on the right to read more)
General Fitment 911 GT3 2007-11 911 2009-12 911 2005-08
From $3,174.70
Make a selection
Led tail lights with integrated brake, fog, reverse and indicator light
- euro-approved (homologation).
- led tail light for 2005 to 2008 997.1 models.
- compatible with on-board computer*
*the canbus units are integrated into the tail light, modifications are not necessary (plug and play).
You may experience condensation with these lights. However the lights are specially designed to protect against the effects of condensation.
A frequently disputed issue is fogged glasses inside the lights, this has been around since the early 911, 964, etc. This effect occurs after driving in rain or cold nights, and is a normal physical process. Through the light vents the expanding heated air gets discharged...(choose a part on the right to read more)
General Fitment 911 GT3 2007-11 911 TURBO/GT2 2007-09 911 2005-08
Speedart GT2 style rear wing Porsche 996 98-05
Gt-rear spoiler for Porsche 996 Carrera new GT-look rear spoiler. Car on photo with turbo-look rear bumper. If the shipping rate depending on your area differs, we will contact you with a revised quote. Please add item to cart for shipping cost or contact us for a quote.
General Fitment 911 1998-05
$3,188.69
Make a selection
997 GT3 rear spoiler fits all 997 (not turbo) includes: deck lid (grp), aluminum upright, 3rd brake light housing and kevlar/carbon wing (l= 145cm, b=28cm, h=7 cm) with carbon rsr look end plates. Material: aluminum, glass reinforced plastic (grp), kevlar-carbon. Also available with wing blade in fiber (grp) FVD512997gt3rs tech tip: facelift models (2009- ), the 3rd brake light can usually be assumed. If necessary please order the 3rd brake light 99763105201 separately. The holes for the intake fan on the rear deck lid must be drilled prior to installation (model variations). Please note wing is fixed and is not adjustable. The air inlet of the rear is not included. Please order 99751262592g2x
This item may ...(choose a part on the right to read more)
General Fitment 911 GT3 2007-11 911 2009-12 911 2005-08
From $3,704.70
Make a selection
This tail/wing is an exact copy of the incomparable and distinctive Carrera rs. It comes complete with mounting hardware for the stock 911 hinge mechanism and mounting location for the deck latch. Requires stock type 911 sc, Carrera etc. Plastic grill, not included. Hinge adapters (part# 11a) are needed for 964 applications. Average weight, 10 lbs.
General Fitment 911 1974-77 911 1978-83 911 1984-86 911 1987-89 911 1989-94
Its time to tune your Porsche 997.2 pdk Carrera or Carrera s! Vivid racing has been on the cutting edge of technology and performance products since 2001. This new innovative product is perfect for those wanting more power and performance out of their Porsche 991 model. It is designed to work with all pdk Porsche 991 Carrera 3.6l and 3.8l platforms. The all new vr tuned obdii port tune auto flash programmer is the solution for your vehicle.
This completely new product allows the end user to program the vehicle through the obdii port in just a couple minutes without having a pc, laptop, or internet connection. There is no need to read out or send any vehicle data as everything is stored in the control u...(choose a part on the right to read more)
General Fitment 911 2009-12 911 TURBO/GT2 2010-13
$2,025.00
Make a selection
Each gruppem aerodynamic component is hand made from the highest grade carbon fiber and kevlar composites. Aerodynamic elements can not only be visually appealing but also improve performance. With more downforce the tires will have more grip through the corners, as well as under braking. Additionally, our components are lighter than their stock counterparts, so overall power-to-weight ratio is improved as well.
Gruppem has poured an enormous amount of research data, testing, and air flow management experience into developing an aero component product line with absolutely no compromise. Every gruppem aerodynamic component is designed to match the make and model for each application, maximizing downforce, ...(choose a part on the right to read more)
General Fitment 911 1998-05
$5,987.03
Make a selection
Product details:
Replaces blower motor assembly and ductwork while still allowing plenty of heat, just like the factory rs part
Features:
-fits all Porsche 993 vehicles (1994-1998)
-saves 9 lbs from the rear of the car
-full carbon fiber construction
-simple diy installation
-this a replica of the Porsche Germany rs lightweight factory heat duct that was used on all 3.6 liter special rs lightweight race cars.
-all fabspeed performance products are backed by the fabspeed lifetime limited warranty
Note:
All late model 993's, 1996-1998 require the Porsche factory 964 fan shroud, part # 96410640302
General Fitment 911 1994-98
Loud and aggressive performance exhaust system recommended for track use only; replaces the restrictive factory mufflers with a free-flowing resonated design.
Features:
Saves 12 lbs from the rear of the vehicle
General Fitment 911 2005-08
$1,957.70
Make a selection
Loud and aggressive performance exhaust system recommended for track use only; replaces the restrictive factory mufflers with a free-flowing resonated design.
Features:
Saves 12 lbs from the rear of the vehicle
General Fitment 911 2005-08
$2,612.45
Make a selection
Loud and aggressive performance exhaust system recommended for track use only; replaces the restrictive factory mufflers with a free-flowing resonated design.
Features:
Saves 12 lbs from the rear of the vehicle
General Fitment 911 2005-08
$2,612.45
Make a selection
Kit includes:
Software fast load dme, sport air filter, header system, sound sportmufflers
Genuine:
Engine - 6 cylinder boxer
Capacity - 3824ccm
Compression ratio - 11,8:1
Max. Power - 261kw (355hp) @ 6600rpm
Max. Torque - 400nm (295lbf ft) @ 4600rpm
Max. Speed - 293km/h
Max. Rpm - 7300rpm
Acceleration 0-100km/h - 4.8s
Tuning:
Max. Power - 281kw (382hp) @ 6500rpm
Max. Torque - 430nm (317lbf ft) @ 4500rpm
Max. Speed - 305km/h
Max. Rpm - 7500rpm
Acceleration 0-100km/h - 4.5s
For 20 years, FVD-Brombacherhas been setting the standard for Porsche tuning. FVD-Brombacherhas perfected the art of Porsche tuning making substantial gains in horsepower and torque, all while retaining the drivab...(choose a part on the right to read more)
General Fitment 911 2005-08
$4,926.90
Make a selection
FVD "brombacher" level 1 tuning kit for the 2009- 997s includes our FVD flashload software cable, a single user diagnostic tool with software and a bmc sport air filter.
Genuine:
Engine - 6 cylinder boxer
Capacity - 3800ccm
Compression ratio - 12,5:1
Max. Power - 283kw (385hp) @ 6500rpm
Max. Torque - 420nm (310lbf ft) @ 4400rpm
Max. Speed - 300km/h (186mph)
Max. Rpm - 7500rpm
Acceleration 0-100km/h (0-60mph) - 4.5s
FVD level 1 tuning:
Max. Power - 290kw (395hp) @ 6500rpm
Max. Torque - 432nm (319lbf ft) @ 4500rpm
Max. Speed - 305km/h (190mph)
Max. Rpm - 7700rpm
Acceleration 0-100km/h (0-60mph) - 4.4s
For 25 years, FVD-Brombacherhas been setting the standard for Porsche tuning. We alw...(choose a part on the right to read more)
General Fitment 911 2009-12
$1,527.90
Make a selection
Complete carburetion kits !
Complete kits include pre-jetted and sized carburetors, manifolds, linkage, K&N watershield air cleaners, pressure control unit, heat insulator kit, oil tank breather, fuel line & filter, clamps, injector plugs (as needed), power brake check valve (as needed) and complete installation instructions.
The pmo carburetor was designed from the beginning to be a state-of-the art carburetor. Pmo start off with a casting designed around a 50mm throttle plate and downsized to 46 and 40mm to achieve three different sizes. This compares favorably with conventional carburetors, including weber.
The air entry and flow is much greater than the weber. This is accomplished by having larger ma...(choose a part on the right to read more)
General Fitment 911 1965-69 911 1970-73 911 1974-77 930 1975-77 911 1978-83 911 1984-86 911 1987-89
$10,363.66
Make a selection
The pmo carburetor was designed from the beginning to be a state-of-the art carburetor. Pmo start off with a casting designed around a 50mm throttle plate and downsized to 46 and 40mm to achieve three different sizes. This compares favorably with conventional carburetors, including weber.
The air entry and flow is much greater than the weber. This is accomplished by having larger main barrels in the throttle body, tapering the top covers and then installing larger diameter velocity stacks of corresponding taper. This maintains the boost from the velocity stacks down to the exact point where it operates on the auxiliary venturis.
Flow through the carburetor is also optimized by many additional details such as ...(choose a part on the right to read more)
General Fitment 911 1978-83 911 1984-86 911 1987-89 911 1989-94 911 1994-98
$10,902.10
Make a selection
© 2024 Automobile Atlanta Inc.
505 S. Marietta Pkwy • Marietta, GA 30060 • Order By Phone: 800 792 4944 770 427 2844
|